Steve Anderson wrote:Being a 'belt and braces man' I would be a little concerned that the full 12V could be applied to the 6V motor as the PPL locks up or loses lock for some reason.
Quoting myself there. That's the only reason I suggested the above circuits.
Now, if you're happy to operate without some form of reduced voltage to the motor, then that's fine. I will be the first to admit that I haven't built the circuits so I have to conceed that I'm looking at this from an initial design viewpoint. i.e That's how I would start out.
Others obviously have had experience and it would appear that all is well. It just doesn't sit well with me.
Steve A.
P.S. Actually there is a very simple resolution to my concerns...simply put a 5W Zener of (say) 4-6V in series with the motor....something like a 1N5337B (4.7V)....why I never thought of that in the first place is beyond me!!