Narrow-Bandwidth Television Association

Forum for discussion of television and imaging using mechanical, radio, and early electronic systems.

Skip to content

NBTV on the Raspberry PI

Forum for discussion of electronic television. Generally, stuff to do with CRTs and not using mechanical displays.
Post a reply

NBTV on the Raspberry PI

Postby acl » Tue Dec 07, 2021 4:06 am

IMG_3622.JPG



I'm trying to make Gary Millard's excellent programs work on the Raspberry PI. At the moment I have managed to install Windows 10 on a PI 4 and am able to run the big picture. See screen shot attached. I have now followed on by loading the Linux Twister 0S onto the PI 4 and tried unsuccessfully to run these programs in 'wine'. If anybody has any ideas these would be most welcome. My intention eventually is to run Gary's programs on a standalone Pi zero 2 with a 3.5 Inch touch screen.


Regards Chris G6ACL
acl
Just nod and pretend you understand me
 
Posts: 280
Joined: Thu Mar 08, 2007 7:38 am
Top

Re: NBTV on the Raspberry PI

Postby Harry Dalek » Sun Dec 12, 2021 1:54 pm

This sounds very interesting ,i have never really looked into all this as i tend to like to do the hobby in a simplest way so tend to stay away from this side of it ,but please do show results as i know this could be very useful to others .
The electromagnetic spectrum has no theoretical limit at either end. If all the mass/energy in the Universe is considered a 'limit', then that would be the only real theoretical limit to the maximum frequency attainable.
User avatar
Harry Dalek
"Fester! Don't do that to 'Thing'"
 
Posts: 4903
Joined: Fri Sep 26, 2008 4:58 pm
Location: Australia
Top
Post a reply

Return to Electronic NBTV

Who is online

Users browsing this forum: No registered users and 1 guest

Powered by phpBB® Forum Software © phpBB Group
cron