Centralised area for notes about construction projects. Each project has its own sub-forum. In the sub-forums will be topics relevant to parts of that project (e.g., there might be a topic on CRT problems). If you start a construction diary, just post in the forum with your project name as the topic, and a moderator will create a sub-forum for your project.
Moderators: Dave Moll, Andrew Davie, Steve Anderson
by Harry Dalek » Sun Jul 08, 2018 2:50 pm
Having a good look at the problem of the dual screen over scanning ,i have adjusted the current limiting resistors on the line scan no effect apart from stretching or strinking whats in that area .
Did not try the framing but that seems fine unless i am missing some thing .
Having a think about it the last thing i can think of is this Yoke is too long for this type of Vidicon the over scanning due to this ,i am not sure what the yoke was originally used for perhaps a longer plumbicon tube..any case happy with the results .
The electromagnetic spectrum has no theoretical limit at either end. If all the mass/energy in the Universe is considered a 'limit', then that would be the only real theoretical limit to the maximum frequency attainable.
-
Harry Dalek
- "Fester! Don't do that to 'Thing'"
-
- Posts: 5376
- Joined: Fri Sep 26, 2008 4:58 pm
- Location: Australia
-
Return to Construction Diaries - Electronic Televisions
Who is online
Users browsing this forum: No registered users and 8 guests