Have not posted for a while here not for lack of interest but for the old problem its not cooperating with my design flaws to put it kindly
I nearly tried using a lens disk see picture (idea didn't get passed this stage i could see really it would of been giving similar results to a mirror reflection anyway ) my interest really is still working out the mirror side of things hate to give up fingers crossed for year 2.
The little i have on what is said to have worked i have been reviewing .
Looking at what is different to what i have been trying , 2 other Nbtvers ideas the mirror drum doesn't use a lens before the mirror ,so this is different for me ,the image is then focused to an opaque plate with a pixal sized hole with the photo sensor adjusted behind this.
I can see the reason for the tiny hole in the plate but it really bothers me about the light loss and sort of turns the mirror drum into a stationary nipkow wouldn't the light loss be worse than a nipkow camera ?
Suppose if it works its fine but i am surprised a tiny lens is not used here .
If i were to try the tiny hole in the plate i know my head amp would need lot more light .
I have set up my camera in the shed for further experiments and changes ,i will look into getting mine close to these ideas see what happens .