Spot wobble

Moderators: Dave Moll, Andrew Davie, Steve Anderson

Spot wobble

Postby Harry Dalek » Thu Jun 29, 2017 2:51 pm

Today i hooked up my Devil saw tooth generators to my main oscilloscope ...set the little monitor back to 32 line for now and that seems to work fine i could adjust the scope raster small to scan a slide not sure how small the raster dot has to be but i should think it would give a result at least if the image is large but thinking ahead here .
It gave me a chance to try some spot wobble ac coupled the video going to the opto coupler to the frame sawtooth
This scope does not have a z axis input ,and it seems work pictures are flipped and inverted but results they are .
Got to clean my scope ...i have to point out it is in my shed :oops:
Attachments
anigif.gif
anigif.gif (375.54 KiB) Viewed 3653 times
DSCN9183.JPG
DSCN9183.JPG (198.65 KiB) Viewed 3653 times
DSCN9194.JPG
DSCN9194.JPG (197.13 KiB) Viewed 3653 times
DSCN9258.JPG
DSCN9258.JPG (204.59 KiB) Viewed 3653 times
DSCN9305.JPG
DSCN9305.JPG (203.97 KiB) Viewed 3653 times
The electromagnetic spectrum has no theoretical limit at either end. If all the mass/energy in the Universe is considered a 'limit', then that would be the only real theoretical limit to the maximum frequency attainable.
User avatar
Harry Dalek
"Fester! Don't do that to 'Thing'"
 
Posts: 5364
Joined: Fri Sep 26, 2008 4:58 pm
Location: Australia

Return to The Tasmanian Devil VCR139....A for Andrew

Who is online

Users browsing this forum: No registered users and 2 guests

cron