Anyway, ill explain this the best i can step by step. Ill put in as many steps (as i can remember!).
1. You'll need an encoder, so i just used wirecast encoder. It has a free version, and it works lovely. You can find it here:
http://www.telestream.net/controls/wire ... t-play.htm2. You'll need to set up the encoder, but, on this part, i did it a bit haphazardly and it took much longer to do. Once the encoder is downloaded, open it up, and go to the help section. Thats the best i can explain how to set it up, but you will need to have your youtube account linked to it.
3. In YouTube, On the far left hand side, click the "My Channel" button. It should be right below the home button.
4. This should bring you to your channel, if not, there's a serious problem.
Right underneath the search bar, hit the video manager button. This should bring you into YouTube studio.
5. Again, on the far left hand side, hit the Live Streaming button. It should be right underneath the video manager button. Then, hit stream now.
Right now, im streaming, so it wont let me go any farther than that. Tomorrow morning the print is supposed to be finished, along with the stream, so ill update you then. I think i went into to much detail for to little steps!