Thanks Graham, I'm missing the last paper issue but that may have got mislaid with all the junk mail we get
This afternoon the perspex sheets came. Also a replacement panel for the "odd one out". Unfortunately this new one is even more blue than the one it replaced even though it is from the same manufacturer. I'm guessing this is from a different batch or they are sold as matched sets I'll have to discuss it with the seller.
The smoked glass makes the picture appreciably dimmer but with better contrast as it hides the white led dies more than it attenuates the whites. Not really shown up by the camera.
With the frosted sheet flat up on the displays behind the smoked sheet the dots are softened but not blurred. Testcards look good but I still find faces hard to recognize.
- syliva - no spacing
- DSC_0593-s.JPG (147.66 KiB) Viewed 23608 times
With the frosted sheet about 2mm spaced I find best
- sylvia - 2mm spacing
- DSC_0597-s.JPG (136.9 KiB) Viewed 23608 times
- testcard - 2mm spacing
- DSC_0598-s.JPG (129.42 KiB) Viewed 23608 times
4mm and its just a bit too blurry!
- sylvia - 4mm spacing
- DSC_0596-s.JPG (137.32 KiB) Viewed 23608 times
I've got a first go at colour working. This needs hand synchronising (i.e. I have to keep stopping and starting the input until it settles with all the right colours in the right places) but at least I've proved that it is possible with this processor to get all the processing done in time!
- bars
- DSC_0599-s.JPG (151.07 KiB) Viewed 23608 times