Moderators: Dave Moll, Andrew Davie, Steve Anderson
Andrew Davie wrote:For reference others have had similar problems and solved it using software serial. I seem to have a few pins free (see my Architecture documentation) so I might just try switching and see how I go.
Sketch uses 28844 bytes (100%) of program storage space. Maximum is 28672 bytes.
Klaas Robers wrote:Why shouldn't you have a separate board to program the Arduino, then place the chip onto the televisor board? In that way you split up programming and running. I assume the Arduino is in a socket on the PCBs.
Klaas Robers wrote:I know Steve, I have and use the PICkit 2 now and then. However Andrew has the touch sensitive LCD display circuited in parallel to the USB programming data port. Once that is initialised it continues to send data to the port, which interferes with the programming information. At least that is how I understood what is happening. I fear that the same can also happen with the PIC controllers. I never had such a problem because I program them on a separate small programming socket that plugs into the PICkit 2.
Return to Andrew Davie's Arduino Televisor
Users browsing this forum: No registered users and 5 guests