Serial I.D. Tag

A build to model parts for a Baird lens box, the type seen on televisors, suitable for 3D printing and use on a televisor model.

Moderators: Dave Moll, Andrew Davie, Steve Anderson

Serial I.D. Tag

Postby McGee2021 » Fri Aug 25, 2017 2:04 am

One of the parts that im looking forward to making is the serial I.D. tag, which is located on the center back of the televisor I was hoping to replicate the one on the televisor at the ETF, but it was badly degraded, and no part of it could be read. I was hoping that i could source some pictures from somebody, as the ones i have dont make the cut. I have a model, and a piece of metal cut to the proper size, but no text information to engrave onto it. Maybe it is similar to the serial I.D. tag on the Radio Model A, produced by Baird.
baird_model_a.JPG (125.02 KiB) Viewed 2056 times
John Logie Baird was obviously the man who sowed the seeds but did not reap the harvest.
User avatar
Just nod and pretend you understand me
Posts: 228
Joined: Wed Aug 12, 2015 9:41 am
Location: Tourist Trap Town

Return to Baird Lens Box and Face plate

Who is online

Users browsing this forum: No registered users and 0 guests